Instantaneous curing of UV curing ink realizes high production
efficiency
Because it is an air-cooled type, the necessary chiller is unnecessary in the water-cooled type
Irradiation window size is to a maximum of 130 mm x 29mm
Irradiation head line-up that optimally covers the printing width of our printer
Just connect signals from the printer directly! Easy to build system
Up to two irradiation heads can be controlled for each controller, and it is possible to increase the amount of light, double-sided printing, etc.
UK5000-4 | UK5000-2 | |
---|---|---|
Central wavelength | 385 ± 5nm | 385 ± 5nm |
Dimensions of irradiation window | 130mm x 29mm | 65mm x 29mm |
Outside dimensions | 158mm x 107mm x 103mm | 93mm x 107mm x 103mm |
Average illuminance | 3.5W/cm² | 3.5W/cm² |
Power consumption | Maximum 250W | Maximum 125W |
Cooling system | Air cooling | Air cooling |
“Since it is under development, specifications may be changed”
Specifications | ||
---|---|---|
Outside dimensions | 320mm x 350mm x 180mm | |
function | Luminescence timing | Luminous light is delayed by 0 to 3,990 ms (10 ms steps) from the light emission command |
Light control level | 6 steps (0, 20, 40, 60, 80, 100%) | |
Module OFF | 4LED modules are turned OFF for each module |
|
I/O | Input | Head 1 emission command, head 2 emission command, module OFF, light control level, emergency stop, head 2 control mode |
Output | Abnormal, lighting | |
Irradiation head connection cable length | Maximum 5m | |
Power supply | AC100V | |
Power consumption | Maximum 900W (2 heads) |
“Specifications are subject to change without notice”